Car Alternator Problems

Modern cars, trucks and caravans are well-equipped with every comfort one can imagine. All these appliances and the engine need loads of electric power to operate. Where does all this power come from? This requirement is satisfied by a very simple gadget, known as the ‘Alternator’. It is short for ‘Alternating Current Generator’. The efficiency of these devices is around 50 – 60%. Through the use of the alternator, which is a dynamo, your car generates its own electrical power and stores it in a rechargeable car battery. Ergo, it’s absolutely essential that you keep a check on the working of the alternator or you may be left high and dry with no power to drive your car!
How Does the Car Alternator Work?
The alternator creates electricity by exploiting a fundamental law of electromagnetism which is – ‘Changing magnetic field creates an electric field’. There are two important parts of the alternator – stator and the rotor. The rotor is essentially a set of three pairs of electromagnets with opposite poles facing each other, placed on a cylindrical disc. They are 120 degrees out of phase from each other. Stator is the stationary part placed at the center of the rotor disc.The rotor is attached to engine crankshaft, by a belt. Thus, an important part of this assembly is the alternator belt, which transfers engine torque to the rotor. When the engine is operational, crankshaft rotation makes the rotor go around. The revolving rotor creates a changing magnetic field. This field induces a three phase current in the central stator. A current is generated 120 degrees out of phase, by each of the magnet pairs. There are output terminals attached to the stator with separate windings for every phase.However, this output current is AC (Alternating Current) but the car accessories require DC (Direct Current) for operation. Therefore, AC to DC conversion is achieved by connecting the output current from stator to a double bridge rectifying diode circuit, which effectively does the job. So, one car alternator with such three sets of magnets generates a threefold current which is 120 degrees out of phase. The total voltage output of the alternator is around 14 V typically.

The DC output from the rectifier is fed to the battery which gets charged and it effectively ‘stores’ the generated electricity. For operating the electromagnets in the alternator, a voltage needs to be supplied from the battery at the start which is called ‘exciter’ voltage. The whole alternator assembly is supported by bearings for smooth rotation. Thus, chemical energy of the gasoline in your tank is converted into electrical energy, by an alternator.

Troubleshooting Car Alternator Problems
Any piece of electromechanical equipment is bound to breakdown at some point, if not maintained properly, due to the constant frictional forces. The car’s alternator is no exception to this. Keeping a tab on the performance of your car alternator and maintaining it is a simple job. Here’s an essential guide to troubleshooting alternator problems effectively. If your car’s headlights go dim often and electrical accessories experience problems, it’s but natural to suspect alternator issues. Here’s how you can go about diagnosing and solving problems.
– Check the ‘ALT’ Light
Observe the front panel of your car and see if a light marked as ‘ALT’ is glowing on the dashboard. If this LED is glowing, it’s a direct indication that the alternator output voltage has dropped substantially. It’s imperative that you test the alternator immediately.
– Testing the Alternator
The alternator has three operating stages, with each providing a certain voltage output. Therefore even if one stage or two stages fail, you may not notice, as some amount of voltage output is still charging the battery. Also, if you are not putting a lot of load on the battery, and all three stages have failed, still the car can operate on the reserve charge in the battery. This makes it difficult to diagnose whether source of the problem is the alternator.
The way to check out this problem and take care of it is quite simple. Set the engine on idling mode and check the voltage between the output terminals of the alternator by using a digital multimeter set on the voltage mode. If it has fallen below the maximum of 14 V, then there may be a stage failure. In case it’s indeed maximum at 14 V, check if it remains stable after you apply more load like the air conditioning. If it’s not remaining stable, you can be assured that the alternator is in need of repair. Test the battery output voltage too, as sometimes it’s a dead battery that’s the culprit.
– Check the Functioning of Electromagnets
Check if the electromagnets are operational by seeing if metal objects get attracted towards the alternator. Then check for unusual rumbling noise from the alternator. It may indicate that the bearings are wearing out. In that case, you may need to replace them soon. Check the rotor belt as it may slip or break. Replacements are easily available at your neighborhood car accessories store.
– Observe the Alternator Belt
A worn out or slackened alternator belt may be the reason for the alternator’s low voltage output. Open the hood and observe the alternator belt’s condition, along with its tension. If it’s worn out, get it replaced. In case it has lost tension, get your car to the nearest car repair center to get the belt tension adjusted precisely.
– Check For Loose Connections
A very common reason for problems in the working of most electrical devices is ‘Loose Wiring’. Check for loose connections that might be hampering the functioning of the alternator. Fixing them might restore functionality to normalcy.
Last but not the least, have a tried and trusted mechanic by your side for expert advice in case the symptoms of the problem go beyond your understanding. Always try to understand the solution of a car problem if it crops up, even if the mechanic solves it for you. Trust me it always helps and comes to your aid, when you are on your own.

Wheel Bearing Noise

Detecting the noise in wheel bearings can be a tricky job. However, with the correct understanding of how to diagnose the problem, it becomes easy to solve noise-related issues in wheel bearings. A rumbling or cyclic noise can be heard in wheel bearings with problems in their smooth functioning. If the driver senses even a slight problem in the smooth running of wheels, he should go for wheel bearing noise diagnosis. If the problem of bearing noise is not addressed in a timely manner, it can hamper the functioning of wheels.
Identifying Wheel Bearing Noise
The noise emanating from wheel bearings can differ from wheel to wheel depending on the degree of damage caused to them. At first, the noise originating from wheels might sound like a whistle. However, if the problem worsens, the noise could grow louder. Therefore, it is necessary to find out the exact cause of noise.
▶ A common trick used for identifying problems associated with wheel bears is checking whether noise heard at the time of acceleration and deceleration remains the same. One should drive the vehicle along a circular path, both clockwise and anti-clockwise, in order to find out which of the wheels (left or right) emits the sound caused by a damaged bearing.
▶ The noise originating from a wheel bearing doesn’t change with changing speeds; however, it might increase or decrease at the time of turning. Therefore, one can say that the noise heard at regular intervals, while driving at a steady speed, is a sign of problem associated with bearings.
▶ Do not confuse wheel bearing noise with that produced by a damaged CV joint; both the problems are different from each other and they need be dealt with separately.
▶ Noise produced by wheel bearings is a result of lack of lubrication and in some cases, physical damage caused to them. Friction between dry areas of bearings produces a humming sound; the sound repeats at regular intervals.
▶ A mechanical jack proves to be of great help in lifting the car; wheels (i.e. bearings) can be easily diagnosed for wheel bearing noise. While spinning the wheel with one hand, one should place the other hand on the strut assembly. If there is any problem in the smooth functioning of wheel bearing, a noise can be heard.
It is necessary to lift the vehicle to find out the side from which the noise originates. Wiggling the tire back and forth should helps us understand whether the tire is fitted loosely or not.
Front Wheel Bearing Noise
▶ The front wheel should be checked for noise as well as lubrication.
▶ Servicing of the front wheel bearing should be done every 30,000 miles.
▶ At the time of driving, listen carefully to any sound originating from wheels.
▶ Noise originating from the floorboard indicates that the problem is not related to wheel bearing; in fact, it could originate in any other part of the vehicle.
Rear Wheel Bearing Noise
▶ Noise produced by the rear and front wheel bearings is almost the same. In such cases, diagnosing the problem associated with bearing noise can be difficult.
▶ In one of the methods used for diagnosing such kind of noise, the vehicle is driven at a constant speed; slight changes to the speed are occasionally made. It is important that you vary the speed because there are certain cars which make noise only at certain speeds.
▶ The dangers associated with wheel bearing noise shouldn’t go undetected. It must be dealt with or repaired at the earliest.
While diagnosing the problem of wheel bearing noise, one should check if there are any cracks on the surface of the bearing. Even smaller cracks can later on cause big problems. To detect the minute cracks, one should diagnose the bearing in bright light. Cracked, pitted or worn out bearings should be replaced. The parts which bear the hub bore and spindles should also be checked for any kind of damage. At the time of inspection, one should check if there is any damage caused to the bearing hub bore; its fitting should also be checked. If the bearing hub bore doesn’t fit properly, it calls for replacement of the drum or rotor or hub. One should also check whether spindles are aligned properly. In few cases the spindles might not be aligned in a straight line; thus, it becomes necessary to carry out proper diagnosis of the problem. The steering knuckle should be replaced if there is any problem in the operation of spindles.
Working of Bearings
A bearing is a machine component which performs the function of constraining the relative motion between moving parts of the machine. The act of constraining the relative motion is aimed at facilitating only a certain kind of motion (differs from machine to machine). The different types of motions permitted by bearings are linear motion, axial rotation, hinge motion and spherical rotation.
One should conduct a careful diagnosis of the worn out and damaged parts of the vehicle to determine the exact cause of wheel bearing noise. In some cases, it is not possible to find out the problem on our own. In such instances, consulting an expert should be the right thing to do.