Car Speakers Installation

Most cars these days come with an audio system installed. However, many car owners are not satisfied with the factory speakers that come along with the car. They often offer flat sound and a lot of distortion. Moreover, factory speakers are the weakest components of the car and may not last for many years. This leaves car owners with the choice of upgrading the speakers of their car.

Installing high quality speakers in your car not only improves the sound quality, but also increases the life of your audio system. Speaker installation is not all that difficult and requires a few basic tools that can be found around the house.

Installation

Installing speakers is a fairly simple job and can be done in about an hour or so. It requires a few simple tools and a basic knowledge of electrical wiring or automotive repair. You can get the job done by a professional, but installation costs are high and can be heavy on your pocket. The best thing would be to do it yourself.

Things Required:

– Screwdriver set
– Multi-use screws
– Drill
– Blow dryer
– Wire crimper
– Soldering iron
– Wire stripper
– Socket wrench set
– Electric tape
– A sharp knife
– Super glue

Directions:

Step 1: The most important thing to do before you begin installation is to read the instructions of your speakers.

Step 2: Remove the door panel and grill covering the old speakers. For that you need to first remove the door panel popper.

Step 3: Using the appropriate screw drivers, unscrew the old speakers and disconnect all the attached wiring. Once the old speakers are disconnected, carefully pull them out from their mountings.

Step 4: Your new speakers have to be installed in the place of the old ones. If you are planning to use the same old factory wiring for your new speakers, the task is extremely simple.

Step 5: Using a blow dryer or a heat gun, warm the Dynamat for installation on the door. Apply an adhesive to the surface of the door where you want to install the speaker. Peel off the back of the Dynamat and install it to the door. Use a roller to press the material onto the surface to ensure a tight bond.

Step 6: Connect the speaker harness to your new speakers, carefully attaching the right terminals. Solder or crimp the wire connections. Set the speaker in the opening and reinstall it to the mounting. Test your new speakers by playing some music.

Step 7: If they are working fine, it is time to put everything back. Replace the grill and door by fitting the screws carefully. Your new speakers are now installed and ready to use.

Every car has its own type of speakers installation issues and hence it is recommended that you read the instructions in the manual carefully.

Upgrading your Car’s Audio System

Listening to music while traveling in a car has become a norm these days. If you are driving a car from the last decade, there are more chances of the car stereo being outdated. Young drivers generally prefer their cars to be fitted with the best audio systems for in-car enjoyment, as they mostly prefer listening to loud music. Along with the development of technology in audio systems, nowadays you will find a variety of systems housing the latest technologies. While upgrading, you need to keep in mind some considerations to decide on the most suitable setup. But let us first take a look at the sound system parts to be thought about before deciding on an upgrade.

Car Audio System Parts

If you want the best performance from a car’s audio system, instead of replacing individual parts; you may consider a full upgrade of the set. The main part of a car stereo system is the head unit which is incorporated on the dashboard. Modern systems consist of a CD/DVD player, USB connectivity, radio receiver, and a small amplifier. The amplifier is a second system connected to the head unit. It does the job of amplifying signals from the head unit to the speakers. The speaker set consists of multiple speakers and a sub-woofer. The sub-woofer is responsible for throwing out bass signals from the music. Capacitors are other sound components which store energy for further use by the amplifier. Now let us move on to some tips on upgrading the audio system of the car.

Tips on Upgrading your Car’s Audio System

Head Units
When choosing a head unit for the car audio system, go in for one that has options for connectivity. Nowadays, most head units are sophisticated, and include a large LCD touchscreen for GPS navigation display and showing a view of the rear camera. They let you connect MP3 players, iPods, external hard drives, and other media devices.

External Amplifiers
Though there is a built-in amplifier in the head unit, it might not be that effective to produce enough power. In this case, an external amplifier might be required to add extra power to the sound signals. These systems increase volume levels and that too without compromising with the desired clarity. You can choose a four or five channel car amp, depending on how many speakers you intend to connect. You can select a 350-watt amp for decent output, or a 4000-watt amp for a system with multiple powerful speakers.

Capacitors
These are devices which store power from the amp, and provide it to the speakers when required. Capacitors are mainly used when the alternators are not in a state to provide sufficient energy to the overall sound system. The power of capacitors is calculated in farads. You can choose those which have between point five to 30 farads of power, according to the setup of the audio system. Some of the best capacitor brands are Lanzar, Legacy, Pyle, Blitz, just to name a few.

Sub-woofers and Speakers
You have several different choices when it comes to choosing sub-woofers and speakers for customized car audio systems. Note that the sound majorly depends on the quality of speakers you connect to the sound system. You can choose two- or three-way speakers. Note that the more ranges a speaker can play, the more quality sound you will get. You also have choices in sizes, ranging from eight to 15 inches for hi-fi systems. The best brand for car audio speakers are Sony, Pioneer, Blaupunkt, JVC, and JBL.

Other Modifications
To better the new audio system, you might also need to consider making some modifications to the car interior. This can be done using car soundproofing to prevent outside noise from coming in. The quality of wires also plays a very important part in rendering the best sound. You can upgrade to thick copper wires for preventing the signal to degrade by the time it reaches the speakers. Small adjustments like these do have an impact on the sound heard by the listener.

When it comes to bettering your car’s audio system, experts suggest to use one brand on all installed products, owing to compatibility standards. Another alternative is to purchase a sound package from a renowned brand, which may consist of sub-woofer, speakers, amplifier, and a capacitor. The cost of upgrading the stereo system largely depends on the brand, number of speakers, additional accessories, and installation charges; and can even go to thousands of dollars.